彈簧預緊色譜柱（SAC）是為高壓制備色譜而研發的可自動填裝色譜柱。其優點在于:
1）裝柱時間短，無需二次拆裝，所以可避免傳統色譜柱在拆裝時柱床反彈影響柱效。
2）活塞頭與柱床始終接觸并保持裝柱壓力，避免了傳統色譜柱長時間使用后柱床塌陷的問題，延長使用壽命。
3）采用一套裝柱機，可以填裝多根色譜柱。
4）不使用電氣零部件，可用于防爆區域。
我公司生產的彈簧預緊色譜柱（SAC）的優勢在于：
1）采用氣缸替代氣動液壓放大泵。其優勢所有管路均為氣壓管路，除了色譜柱管內部壓力，其它壓力均不超過8bar，安全性更好；其次，只使用壓縮空氣作為動力來源，操作環境更清潔。
2）管路布局更為簡潔。省去了氣壓轉液壓的所有零部件，一致性更好，操作空間更大更方便。
3）特殊設計的柱底密封結構，只用手?jǐn)Q緊即可實現密封。
4）特殊設計加工的分配方式，可以保證色譜柱的高柱效。
5）操作時間短，節省試劑。
|
柱 管 |
內徑 |
30mm；50 mm |
|
長度 |
650mm |
|
|
內壁加工工藝 |
珩磨，拋光 |
|
|
內壁表面粗糙度 |
Ra≤0.4um |
|
|
柱床高度 |
300mm |
|
|
最小柱床高度 |
50mm |
|
|
耐壓 |
260bar |
|
|
網 板 |
孔徑 |
2um |
|
材質 |
316L粉末燒結網板 |
|
|
高壓密封圈 |
材質 |
PTFE |
|
結構 |
彈簧預緊V型密封圈 |
|
|
活塞 |
材質 |
316L |
|
分配方式 |
扇形 |
|
|
連接 |
進口/出口 |
1/16或者1/8管路 |
|
|
|
|
所有與液體接觸材質包括：316L，PTFE，PEEK
Spring-loaded columns (SACs) are autopacked columns developed for high-pressure preparative chromatography. The advantages are:
1) The column loading time is short, and there is no need for secondary disassembly, so it can avoid the rebound of the column bed during the disassembly and assembly of the traditional chromatographic column, which can affect the column efficiency.
2) The piston head is always in contact with the column bed and maintains the column loading pressure, which avoids the problem of column bed collapse after long-term use of the traditional chromatographic column and prolongs the service life.
3) With a set of column machines, multiple columns can be filled.
4) No electrical parts are used, and can be used in explosion-proof areas.
The advantages of our Spring Prepacked Columns (SACs) are:
1) Adopt pneumatic cylinder instead of pneumatic hydraulic amplification pump. Its advantages are that all the pipelines are pneumatic lines, except for the internal pressure of the chromatography column tube, the other pressures are not more than 8 bar, which is safer, and secondly, only compressed air is used as a power source, and the operating environment is cleaner.
2) The pipeline layout is more concise. All parts of pneumatic to hydraulic pressure are omitted, and the consistency is better, and the operation space is larger and more convenient.
3) Specially designed column bottom sealing structure, sealing can be achieved by only hand tightening.
4) The distribution method of specially designed processing can ensure the high column efficiency of the column.
5) Short operation time and saving reagents.
|
Column tubes |
Inner diameter |
30mm；50 mm |
|
length |
650mm |
|
|
Inner wall processing technology |
Honing, polishing |
|
|
Inner wall surface roughnes |
Ra≤0.4um |
|
|
Column bed height |
300mm |
|
|
Minimum bed height |
50mm |
|
|
Pressure-resistant |
260bar |
|
|
Stencil |
aperture |
2um |
|
Material |
316L powder sintered mesh plate |
|
|
High-pressure seals |
Material |
PTFE |
|
Structure |
Spring-loaded V-rings |
|
|
piston |
Material |
316L |
|
Distribution |
sector |
|
|
connect |
Import/Export |
1/16 or 1/8 tubing |
All materials that come into contact with liquids include: 316L, PTFE, PEEK
2006-2025 上海博華國際展覽有限公司版權所有（保留一切權利）
滬ICP備05034851號-57
